My Thoughts on the Bambu Lab H2C After 500 Hours of Testing
I’ve been testing the new Bambu Lab H2C, and today I’m sharing my thoughts. I have about 500 hours on the machine at this point, and I think I have a pretty good idea of what works and what doesn’t.
Bambu Lab H2C 3D Printer: https://tidd.ly/3XFLS21
Bambu Lab H2D 3D Printer: https://tidd.ly/3HGpktW
Bambu Lab H2S 3D Printer: https://tidd.ly/41owuK1
Bambu Lab Filaments: https://tidd.ly/4fRSpip
Bambu Lab PPA-CF Filament: https://tidd.ly/41kD5VG
Bambu Lab PAHT-CF Filament: https://tidd.ly/4mzkFJt
*This site contains affiliate links for which I may be compensated
Support Clough42 on Patreon: https://patreon.com/join/clough42
Raw Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
http://creativecommons.org/licenses/by/3.0/
00:00 Intro
01:06 Overview and Features
03:14 Disclosures
03:54 The Vortek Hot End System
05:31 Not Really What I Was Hoping For
07:46 The Vortek Swapping Cycle
09:31 Wireless Hot Ends
10:56 Cold Pulls: You Should Try Them
12:34 Test Prints
20:55 New Software Features
21:59 Networking, Cloud, and IoT Safety
23:24 The Heated Bed — Is It Even?
25:52 Impeccable Bed Leveling
27:07 Problems I Encountered
30:21 Conclusions
Source
